top of page

Buy direct from the people who made it. Always in stock and typically ships same day. 


Rail Hangers for Grow Tents and Greenhouses: Rail Hanger Brackets are simply the easiest solution to hanging the light mover Rails of LightRail 3.0, 3.5, 4.0 and 4.20 onto the support bars of an indoor grow tent or greenhouse. And, they come in packages of four. So, one package is needed per light mover rail using two hangers. Or, there are enough hangers to hang two Rails at two per Rail. So, it is complete. Note: Rail Hanger Brackets are compatible with tubing structures up to 1.5 inches in diameter. Also note, Rail Hanger Brackets will position your Rail perpendicular to that support structure. If a perpendicular configuration will not work for your grow tent, see photo, the grow tent board mount method might be a better choice.

Important Rail Hanger Brackets Information


Hint: Rail Hanger Brackets are recommended for use with a one-piece, 6’6” (2m) Rail. Or, they are recommended to use with a Rail half, again as a single piece. And, for a 2-piece Rail as comes in LightRail 3.5 or 4.0 Kits, another grow equipment option is to do this. Make a “splint” for your 2-piece Rail where the Rail halves meet. You can do that by sliding your Rail halves together and then drilling them, just at the seam, onto a small piece of wood. And, this will create the splint to give the extra strength needed at the Rail seam for the suspended Rail in the indoor grow tent or greenhouse setting. 


Note: Rail Hanger Brackets are NOT compatible with Light Rail 5.0. More information on hanging the LightRail light mover in a grow tent or greenhouse.

Rail Hanger Brackets for Greenhouses and Grow Tents; Light Rail

    bottom of page